Schematic of Starter Kit board and details of QWIIC and 1mm pitch battery connectors

[jandls]

Would it be possible to have the schematic of the starter kit board? Without that, it is difficult to know how the microSD card slot, the QWIIC connector, the jumper switches, the 1mm pitch battery connector, etc. are connected. Also, information is needed on the specifications of QWIIC and 1mm pitch battery connectors, so one can buy the right components to connect to these. The schematic would also greatly speed up the design of new applications that integrate the F1 module. Such designs may also need a battery charger, a ‘fuel gauge’ for the battery, a microSD card slot etc.

Basically, at the moment the hardware part shown below provides very little information on all this when clicking on the ‘hardware’ link:

[wilsonto]

Hi @jandls, thanks a lot for your comments. We are in process of pushing an update to the hardware section of the online documentation, which should be available in the next few days. In the meantime, please find the F1 Starter Kit schematic at the link below to help speed up your design. Please let us know if you have any questions or need further assistance.

F1 Starter Kit schematic

[jandls]

Thanks very much!